Quickstart; Before You Start - Parker AC10 Serie Manual De Instrucciones

1-3

QUICKSTART

BEFORE YOU START

This document covers the steps necessary for a basic start up of the AC10 drive. Drive start ups should be
performed by competent electrical technicians who are familiar with AC drives and their applications. For
detailed installation, safety and applications refer to the Product Manual.
Ensure that all local electric codes are met while installing the drive. Check that all live parts are covered to
protect against electric shock and that unexpected rotation of the motor will not result in bodily harm or injury.
This document expects that the drive is already installed in its intended location and that all relevant
installation procedures have been followed.
About this QuickStart
This QuickStart will:



This QuickStart assumes that:




Product Overview
This manual was downloaded on www.sdsdrives.com
+44 (0)117 938 1800 - info@sdsdrives.com
Familiarise you with the terminals and operation of the unit.
Provide basic installation details and a quick set-up procedure.
Show you how to Autotune the drive and start the motor.
You are a competent technician with experience of installing this type of equipment.
You are familiar with the relevant standards and Local Electric Codes (which take
precedence).
You have read and understood the Safety Information provided at the front of this QuickStart.
You realise that this guide contains only basic information and that you may need to refer to
the AC10 Product Manual to complete your installation.
Heatsink
English