Hdd Installation - npg MP800HDTV Manual De Usuario

3. Firmware upgrade
6. When it's up to 100%，it will remind you of upgrade complete，then the
player will reboot, as below：
7. Enter "SETUP MENU"，choose "Factory Default" to recover，and then exit
"SETUP" menu, as below：
Upgrade complete

HDD installation

Install HDD to the player，follow steps as below:
Step 1
Lay down the player，untight the 4 screws on the bottom cover.
Step 2
Take down the 4 screws on the bottom cover，open the cover.
15
www.npgtech.com