Communication Software - Tecsis P3290 Manual De Instrucciones

8. Communication Software

8. Communication Software
Requirements
Hardware requirements:
- spare USB port
- USB adapter cable
- Power supply for transmitter, for example 24 VDC power supply unit
Software requirements:
- Operating system Microsoft® Windows® 2000 / XP or Vista
- tecsis Communication Software
Preparing the instrument for connection
The pressure sensor should be depressu-
rised.
1. Remove clamping nut. Pull out insert and
fold down laterally.
2. Connect USB adapter cable to the
corresponding female connector in the
pressure sensor interior using a flat
plug and plug the other cable tail into a
spare USB port.
3. Connect the pressure sensor to an
auxiliary power supply. Do not yet switch
on the auxiliary power supply.
34 Betriebsanleitung/Operating instructions/Mode d'emploi/Instrucciones de servicio
Female
connector
Sealing
Clamping
nut
Male
connector
Sealing
Case with
pressure
connection
A
GB
B
USB-interface