Bosch GCL 25 Instrucciones De Funcionamiento página 6

Ocultar thumbs Ver también para GCL 25:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Replace all old batteries at the same
time with new batteries of the same
brand and type.
DO NOT mix battery chemistries.
Dispose of or recycle batteries per
local code.
DO NOT dispose of batteries in fire.
Keep batteries out of reach of children.
Personal safety
Stay alert, watch what you are doing
and use common sense when operating
tool. Do not use tool while you are tired
or under the influence of drugs, alcohol
or medication. A moment of inattention
while operating a tool may result in serious
personal injury or incorrect measurement
results.
Use safety equipment. Always wear
eye protection. Safety equipment such
as dust mask, non-skid safety shoes,
hard hat, or hearing protection used
for appropriate conditions will reduce
personal injuries.
DO NOT use the laser viewing
glasses as safety goggles. The laser
viewing glasses are used for improved
visualization of the laser beam, but they
do not protect against laser radiation.
DO NOT use the laser viewing
glasses as sun glasses or in traffic.
The laser viewing glasses do not afford
complete UV protection and reduce color
perception.
DO NOT use any optical tools such
as, but not limited to, telescopes or
transits to view the laser beam. Serious
eye injury could result.
DO NOT stare directly at the laser beam
or project the laser beam directly into
the eyes of others. Serious eye injury
could result.
Use caution when using measuring
tools in the vicinity of electrical
hazards.
Magnets
Keep the tool and laser target away
from cardiac pacemakers. The magnets
of the tool and laser target plate generate
a field that can impair the function of
cardiac
Keep the tool and
laser target away from
magnetic data medium
and magnetically-sensitive
equipment.
The effect of the magnets of
the tool and laser target plate can lead to
irreversible data loss.
GCL 25 Manual with translations.indd 6
pacemakers.
Use and care
Use the correct tool for your
application. The correct tool will do the
job better and safer.
Do not use the tool if the switch does
not turn it on and off. Any tool that
cannot be controlled with the switch is
dangerous and must be repaired.
Store idle tool out of the reach of
children and do not allow persons
unfamiliar with the tool or these
instructions to operate the tool. Tools
are dangerous in the hands of untrained
users.
Maintain tools. Check for misalignment
or binding of moving parts, breakage of
parts and any other condition that may
affect the operation. If damaged, repair
tool before use. Many accidents are
caused by poorly maintained tools.
Use the tool, accessories, etc., in
accordance with these instructions
and in the manner intended for the
particular type of tool, taking into
account the working conditions and the
work to be performed. Use of the tool for
operations different from those intended
could result in a hazardous situation.
Service
Have your tool serviced by a qualified
repair person using only identical
replacement parts. This will ensure that
the safety of the tool is maintained.
Develop a periodic maintenance
schedule for tool.
Follow checking recalibration
procedures outlined in this instruction
manual. When cleaning a tool be
careful not to disassemble any portion
of the tool since internal wires may
be misplaced or pinched or may be
improperly mounted. Certain cleaning
agents such as gasoline, carbon
tetrachloride, ammonia, etc. may damage
plastic parts.
SAVE THESE INSTRUCTIONS.
-6-
4/24/12 8:29 AM

Publicidad

Tabla de contenido
loading

Tabla de contenido