Installing Batteries - CVS Pharmacy AUTOMATIC WRIST Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLING BATTERIES

1. The battery cover is
located along the
side of the monitor.
Remove battery cover
by pressing down and
pulling away from the
monitor.
2. Install batteries accord-
ing to the polarity
indications inside the
compartment (as shown
in figure 2). Battery
Type: 2 Alkaline LR03
(AAA) size
3. Place in the other
battery, according to
the polarity indications
inside the compartment
(as shown in figure 3).
4. Replace the cover
by inserting it back
into place.
1.
2.
3.
4.
13
Replace the batteries if:
1. The weak battery symbol appears on
the display.
2. Nothing appears on the display when the
power is switched on.
As the supplied batteries are for test only,
they may be discharged earlier than batteries
you buy in stores. Replace all batteries at
one time (as simultaneous set). Use only
1.5V AAA alkaline batteries. Remove batteries
when unit is not in use for extended periods
of time. Date and time will need to be
reset if batteries are removed or replaced.
Clean contacts on battery and in battery
compartment with a soft dry cloth each time
you install batteries.
Note: Batteries are hazardous waste.
Do not dispose of them together
with the household garbage.
14

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Cvsbpw-610

Tabla de contenido