User instructions
Before first use
Wash all pieces, except the temperature probe, in warm soapy water, rinse,
and dry thoroughly before first use.
Do NOT immerse temperature probe in water or any other liquid.
How to use
1. Place base on heat resistant stable surface in a well ventilated area.
2. Place the drip tray onto the base.
3. Make sure the temperature probe is turned off. Insert temperature probe into
the receptacle in the handle. Plug the power supply cord into a wall outlet.
4. Adjust the temperature probe to the desired temperature. NOTE: The power
indicator light is also the temperature indicator for the grill.
5. Allow the unit to preheat 7–10 minutes. Place food directly on the grill. Place
glass lid onto grill. Cook food to desired doneness.
6. When Cooking is finished, turn the temperature probe knob to OFF and
remove the plug from the wall outlet.
7. IMPORTANT: Wait until the grill has cooled down completely before removing
the temperature probe, or attempting to clean the unit.
CAUTION
1. Hot oil and liquid may splash as grease and juices hit the drip tray. BE
CAREFUL WHILE GRILLING!
2. DO NOT TOUCH any hot surfaces while cooking. The grill may become
extremely hot while cooking and will remain hot while unit is cooling down.
3. DO NOT overload the grill surface.
4. DO NOT remove the temperature probe until the grill is turned OFF,
unplugged and completely cooled.
5. DO NOT move the grill while in use.
DO NOT touch hot surfaces. Always use handles.
ALWAYS make sure that the unit is set to the OFF position when not in use and
when unplugging from power outlet.
CAUTION: BE CAREFUL NOT TO TOUCH THE BASE UNIT AFTER COOKING AS IT
REMAINS HOT!
User instructions
7