Extension Pole And Tool Assembly; Extension Pole Assembly; Harvesting Head Assembly; Troubleshooting - CAMPAGNOLA POWER MOTOR PRO Manual De Uso Y Mantenimiento

WARNING!
•
As soon as the engine starts working, the tool produces harmful exhaust gas, which can be odourless and
invisible.
•
Do not use the tool indoor or in scarcely airy rooms.

5.5 Extension pole and tool assembly

5.5.1 Extension pole assembly

Carry out the following operations:
a) Insert the joint (12) (picture F) into the shaft.
b) Insert the extension pole (13) (picture. G).
c) Tighten the screw (14) (picture G).

5.5.2 Harvesting head assembly

Carry out the following operations:
a) Insert the joint (12) (picture H) into the shaft.
b) Insert the harvesting head into the extension pole (13) (picture I).
c) Tighten the screws (14) (picture I).

5.6 Troubleshooting

WARNING!
All special maintenance operations shall be carried out only by well-trained personnel.
FAULTS
The engine does not start.
Overheating comes out of the gearbox.
The harvesting head does not move.
NOTE: If the indicated remedies do not solve the problems, take the unit to an Authorized Service Point.
Campagnola Srl – USE AND MAINTENANCE MANUAL – Traslation of the original Instructions
Ver.1.0 - Rev.: 00, Data: 20/10/2016
CAUSE
• Missing fuel.
The pre-starting procedures have not
•
been carried out properly.
Missing lubrication.
•
• Worn-out component.
• The extension pole has not been in-
serted properly.
REMEDY
• Add fuel.
Check the engine manual.
•
• Take the tool to an Authorized Service
P oint.
• Check the extension pole and the trans-
mission joints for proper positioning.
Pag.24