Connection To Power Supply - Premium PES615D Manual De Instrucciones

Note: The safety distance between the cook top and the cupboard above the
hotplate should be at least 760mm.
Affix the cook top to the table by screwing four brackets on the bottom of top (see
picture) after installation. Adjust the bracket position to suit for different table top
thickness.
Cautions
The ceramic cooker hob must be installed by qualified personnel or
1.
technicians. We have professionals at your service. Please never
conduct the operation by yourself.
The ceramic cooker hob shall not be mounted to cooling equipment,
2.
dishwashers and rotary dryers.
The ceramic cooker hob shall be installed such that better heat radiation can
3.
be ensured to enhance its reliability.
The wall and induced heating zone above the table surface shall
4.
withstand heat.
To avoid any damage, the sandwich layer and adhesive must be
5.
resistant to heat.
A steam cleaner is not to be used.
6.
A board is must to be installed underneath the hob.
7.

Connection to power supply

The socket should be connected in compliance with the relevant standard,or
a single-pole circuit breaker.the method of connection is shown in Figure (3)
3