Panacom PA-7500 Manual Del Usuario página 3

PA-7500 - USER MANUAL
Thanks for purchasing Panacom Home & Office Telephone PA-7500.
Please read this manual carefully before using this Telephone, which
is the best guideline offering best service.
1. INSTALLATION
1) Put the telephone in a dry,ventilation and non-erode gas place.
2) After installing the spiral cable line in the handset and the host,
then connect the line port and telecom port with straight cable line.
Pick up the handset and you will hear the echo from the exchanger
or PABX. That means telephone is ready for use.
2. pAckAge ITemS
1 Host
1 Handset
1 Spiral cable line
1 Straight cable line
1 User's manual
3. USe meThOd
1. pAUSe
During dialing, you can press pause key to make the next number
has a 3.6seconds delay to active addition function when using un-
der certain public telephone exchanger or PABX.
2. mUTe
When you are in conversation, but you don`t want the other side
hear you, you can press MUTE and hold it.The function will be off
when you release it.
3. FLASh
When there is an engaged tone or a wrong number, you can press
FLASH key to hang up and make the next call.
4. RedIAL
In the case of engaged tone or no answer, you can press REDIAL
key to redial the destination number automatically.
5. p/T
Before the phone is put in service, you can turn the dialing mode
switch to P or T position to be set in accordance with the dialing
Pg. 3