Sears CRAFTSMAN 580.750910 Instrucciones De Uso página 5

A WARNING Use ofpressure washer could create
puddles and slippery surfaces causing
_ youtofallresulting indeath o rserious
T_ injury.
Kickback fromspray guncould cause y outofallresulting
indeath o rserious injury.
Operate pressure washer from astable surface.
. The cleaning area should have adequateslopes and drainageto
reduce the possibility of a fall due to slippery surfaces.
. Be extremely careful if you must use the pressure washer from
a ladder, scaffolding, or any other similar location.
. Firmly grasp spray gun with both hands when using high
pressure spray to avoid injury when spray gun kicks back.
WARNING Unintentional sparking could cause fire or
electric shock resulting in death or
serious injury.
WHEN ADJUSTING OR MAKING REPAIRSTO YOUR PRESSURE
WASHER
, Disconnect the spark plug wire from the spark plug and place
the wire where it cannot contact spark plug.
WHENTESTINGFOR ENGINESPANK
, Use approved spark plug tester.
, DO NOT check for spark with spark plug removed.
A WARNING Starter and other rotating parts could
entangle hands, hair, clothing, or accessories
resulting in serious injury.
. NEVERoperate pressure washer without protective housing or
covers.
. DO NOTwear loose clothing, jewelry or anything that could be
caught in the starter or other rotating parts.
Tie up long hair and remove jewelry.
A WARNING Risk of eye or bodily injury.
Spray could splash back or propel
objects resulting in serious injury.
Always wear indirect vented (chemical splash) safety goggles
marked to comply with ANSi Z87A when using or in vicinity of
this equipment.
. NEVERsubstitute safety glasses or dry-condition goggles for
indirect vented safety goggles.
. Always wear protective clothing such as a long-sleeved shirt,
long pants and close-toed shoes.
NEVERoperate pressure washer when barefoot or wearing
sandals or shorts.
A CAUTION Excessively high operating speeds could
result in minor injury and/or pressure washer damage.
Excessively low speeds impose a heavy load.
, DO NOTtamper with governor spring, links or other parts to
increase engine speed. Pressure washer supplies correct rated
pressure and flow when running at governed speed.
DO NOTmodify pressure washer in any way.
NOTICE High pressure spray could damage fragile items
including glass.
DONOT pointspraygun at glasswhenusingred(0°) spraytip.
. NEVER aimspraygun at plants.
NOTICE improper treatment of pressure washer could
damage it and shorten its fife.
if you havequestions about intended use, ask dealer or contact
qualified service center.
o NEVERoperate units with broken or missing parts, or without
protective housing or covers.
- DO NOTby-pass any safety device on this machine.
- DO NOTtamper with governed speed.
- DO NOT operate pressure washer above rated pressure.
- DO NOT modify pressure washer in any way.
- Before starting pressure washer in cold weather, check all parts of
the equipment to be sure ice has not formed there.
. NEVERmove machine by pulling on hoses. Use handle provided
on unit.
. This equipment is designedto be used with Sears authorized parts
ONLY. if equipment is used with parts that DO NOTcomply with
minimum specifications, user assumes all risks and liabilities.