Sears CRAFTSMAN 580.750910 Instrucciones De Uso página 8

4. Place accessory tray (A) over hobs (B) on handle
(viewing from front of unit). Push the tree clips (C) into
the hobs until they sit fiat against the accessory tray.
a_
5. insert multi-colored quick connect spray tips and other
supplied accessories in spaces provided in accessory
tray. See How to Use Accessory Tray.
6. Attach bottle bracket (g) to handle with carriage bolt (E)
and black plastic knob (F). Tighten by hand.
@
Preject Pre@ PerfectNlix
TM
Seap System
The pressure washer is equipped with a detergent siphoning
hose.
Attach Project Pro@ PerfectMW M Siphen to
Pump
Attach the tube end of the blue PerfectMix
TM
Siphon (G) to
the barbed tube fitting (H) on the pump:
Attach PerfectNIW M Detergent $iphen to
Concentrate Bettle
Place PerfectMWMbottle (not included) in the wire-form
bracket on the handb. Removecap from bottb and insert the
PerfectMWMSiphon (J). Screw the siphon unit to the top of
the bottb (K). Usethe dip on the cap (J) to snap siphon to
wire form bracket when siphon is not in a concentrate bottb.
Add Engine 0ii
1. Place pressure washer on a fiat, level surface.
2. Cleanarea around oil fill and remove oil fill cap/dipstick.
OULFILLER CAP/DUPSTICK
,
LIMIT
Using oil funnel (optional), slowly pour contents of
supplied oil into oil fill opening, frequently checking oil
level. DO NOT OVERFILL.
NOTICE improper treatment of pressure washer could
damage it and shorten its life.
. DONOTattempt t o crankor startthe enginebeforeit hasbeen
properlyserviced with the recommended o il. Thiscould resultin
an enginefailure.
4. Replace oil fill cap/dipstick and fully tighten.