Preparation; Installing/ Removing The Battery Pack - Kenwood ProTalk TK-3301 Manual De Instrucciones

INSTALLING/ REMOVING THE BATTERY PACK

◆ Do not short the battery terminals or dispose of the battery by
fire.
◆ Never attempt to remove the casing from the battery pack.
2

PREPARATION

1 Align the battery pack with the
back of the transceiver, then
press the battery pack and
transceiver firmly together until
the release latch on the base of
the transceiver locks.
2 To remove the battery pack, lift
the safety catch on the base of
the transceiver, then press the
release latch underneath the
safety catch.
3 While pressing the release
latch, pull the battery pack
away from the transceiver.