Kenwood ProTalk TK-3301 Manual De Instrucciones página 24

4 Press and release the PTT switch, then rotate the Channel
selector to your desired channel.
• Upon pressing and releasing the PTT switch, a beep will sound
and the transceiver announces "Tone one".
5 Press the Side 1 or Side 2 key to increment/ decrement the
Tone number, to select the new tone or code.
• QT/DQT table numbers and their corresponding tones/ codes
are provided in the table on page 15.
• Press and hold the Side 1 or Side 2 key to increment/
decrement the Tone number by 5 at a time.
• A voice announcement will inform you of the currently selected
Tone number.
6 Press the PTT switch to save the setting.
• A beep will sound.
• Repeat steps 4 to 6 to set up another channel.
7 Turn the transceiver power OFF and then ON again to
activate the new settings.
Note: The transceiver will automatically return to normal operation
if no action is performed for 5 seconds.
14