International Electrical Symbols - Ega Master EGATRONIK Manual De Instrucciones

- Do not point laser directly at eye.
- Replace the battery as soon as the battery indicator
between 4.5V~4.8V, the battery indicator
battery indicator blinking, the Meter will be turned off after 1 minute.
- When opening the battery door, must make sure the Meter is power off.
- When servicing the Meter, use only the same model number or identical electrical
specifications replacement parts.
- The internal circuit of the Meter shall not be altered at will to avoid damage of the Meter and
any accident.
- Soft cloth and mild detergent should be used to clean the surface of the Meter when
servicing. No abrasive and solvent should be used to prevent the surface of the Meter from
corrosion, damage and accident.
- Turn the Meter off when it is not in use and take out the battery when not using for a long
time.
- Constantly check the battery as it may leak when it has been using for some time, replace
the battery as soon as leaking appears. A leaking battery will damage the Meter.
1. Tachometer Light Source.
2. LCD Display.
3. USB Port (Code 51265 only)
4. Housing
5. Functional Buttons
appears. When the battery is between 4.3V~ 4.5V,

INTERNATIONAL ELECTRICAL SYMBOLS

Warning. Refer to the Operating Manual
Deficiency of Built-In Battery
Conforms to Standards of European Union
THE METER STRUCTURE (SEE FIGURE)
appears. When the battery is
13