Playing An Ipod/Usb Device; Searching And Playing Tracks - Sony XAV-65 Manual De Instrucciones

Ocultar thumbs Ver también para XAV-65:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Playing an iPod/USB Device

In these Operating Instructions, "iPod" is used as a
general reference for the iPod functions on the iPod
and iPhone, unless otherwise specified by the text
or illustrations.
For details on the compatibility of your iPod, see
"About iPod" (page 18) or visit the support site on
the back cover.
MSC (Mass Storage Class)-type USB devices (such as
a USB flash drive, digital media player, Android
phone) compliant with the USB standard can be
used.
Depending on the digital media player or Android
phone, setting the USB connection mode to MSC is
required.
1
Reduce the volume on this unit.
If the device is turned off, turn it on.
2
Connect the iPod or the USB device to
the USB port.
Playback starts automatically.
If an iPod/USB device is already connected, to
start playback, press HOME, then touch [iPod/
USB].
To stop playback
Press and hold OFF for 1 second.
To remove the device
Stop playback, then disconnect.
Do not disconnect during playback, as data in the
device may be damaged.
Caution for iPhone
When you connect an iPhone via USB, telephone
volume is controlled by the iPhone itself. In order to
avoid sudden loud sound after a call, do not
increase the volume on the unit during a call.
About resuming mode
When the iPod currently playing is connected to the
dock connector, the mode of this unit changes to
resuming mode and playback starts in the mode
set by the iPod.
In resuming mode, repeat/shuffle play are not
available.
10
GB

Searching and Playing Tracks

Using repeat play and shuffle play
1
During playback, touch
(shuffle) repeatedly until the desired
option appears.
Repeat or shuffle play starts.
Available play modes differ depending on the
selected sound source.
Note
Repeat play and shuffle play are not available for
version 2.0 VCD with PBC function.
Using direct search play
1
During disc or USB playback, press the
number buttons on the remote
commander to enter an item (track,
chapter, etc.) number, then press ENTER.
Playback starts from the beginning of the
selected point.
Note
During VCD playback, this function is available only
when playing a VCD without PBC functions.
Searching for a file from the list screen
1
During disc or USB playback, touch
The list screen from the currently played item
appears.
Furthermore, touch
the file type (audio/video/photo).
2
Touch the desired item.
Playback starts.
(repeat) or
,
or
to list up by
.

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido