Lock Mode; Maintenance - Urrea NL2A Manual De Usuario Y Garantía

LOCK MODE

This mode cannot be used to perform horizon-
tal or vertical levelling, because the laser lines
are no longer self-balancing. In this mode, the
LED indicator will always shine red.
1. Keep the power switch off, press the mode
button to turn on the laser. The laser lines are
now locked, and are no longer self-levelling.
2. Press the mode button repeatedly to change
the laser- projection mode.
3. Slope your self-levelling cross-line laser level
to project a straight line for reference. In this
mode, the laser lines are projected continu-
ously and will not blink, even if the slope angle
exceeds 4°.
4. To turn the laser off, press the mode button
repeatedly until the laser shuts off.
APPLICATIONS
Your self-levelling cross-line laser level can be
hand-held for point marking and simple align-
ment by sight. It is ideal for the following ap-
plications:
• Hanging pictures, photos, or artwork on walls.
• Wallpapering and stencil work.
• Framing doors and windows.
• Installing electrical wiring and pipes.
• Mounting wall fixtures, electrical outlets,
switches and lighting.
• Installing a drop ceiling.
• Painting.
• Installing closets.
• Laying tile and flooring.
OPERATION
Working with the Tripod
(fig. A)
A tripod offers a stable,
height-adjustable mea-
suring support. Place the
measuring tool via the tri-
pod mount on to the 1/4"
male thread of the tripod
and screw the locking
screw of the tripod tight.
Fig. A
E N G L I S H •
Holding Laterally against
a Wall or Object (fig. B)
For quick checking
heights, the measuring
tool can be held by the
contact surfaces later-
ally against a vertical wall,
cabinets, etc. Take care to
hold the measuring tool
straightly and calmly.
Fig. C
Laser Viewing Glasses (Accessory)
The laser viewing glasses filter out the ambient
light. This makes the red light of the laser ap-
pear brighter for the eyes.
• Do not use the laser viewing glasses as safety
goggles. The laser viewing glasses are used for
improved visualization of the laser beam, but
they do not protect against laser radiation.
• Do not use the laser viewing glasses as sun
glasses or in traffic. The laser viewing glasses
do not afford complete UV protection and re-
duce color perception.

MAINTENANCE

• Keep the measuring tool clean at all times.
• Do not immerse the measuring tool in water
or other fluids.
• Wipe off debris using a moist and soft cloth.
• Do not use any cleaning agents or solvents.
• Regularly clean the surfaces at the exit open-
ing of the laser in particular, and pay attention
to any fluff of fibres.
U se r's m a n ua l
of
Fig. B
Fig. D
9