Bluetooth; Pairing This System With A Bluetooth Device - Sony GTK-XB5 Manual De Instrucciones

BLUETOOTH

Pairing this system with
a BLUETOOTH device
Pairing is an operation where
BLUETOOTH devices register with each
other beforehand. Once a pairing
operation is performed, it does not
need to be performed again.
If your device is an NFC-compatible
smartphone, the manual pairing
procedure is not necessary. (See "One
Touch BLUETOOTH Connection by NFC"
(page 10).)
1
Place the BLUETOOTH device
within 1 meter (3 feet) from
the system.
2
Select the BLUETOOTH
function.
 Press  to turn on the system.
 Press FUNCTION
repeatedly until the
(BLUETOOTH) indicator on
the unit flashes slowly.
Hints
• When there is no pairing information
on the system (for example, when
you use the BLUETOOTH function
for the first time after purchase), the
(BLUETOOTH) indicator flashes
quickly and the system enters the
pairing mode automatically. In this
case, proceed to step 4.
• If the BLUETOOTH connection is
established, terminate the BLUETOOTH
connection (page 10).
8
GB
PAIRING
3
Hold down FUNCTION
PAIRING for more than
3 seconds.
The (BLUETOOTH) indicator
flashes quickly.
4
Perform the pairing procedure
on the BLUETOOTH device.
For details, refer to the operating
instructions of your BLUETOOTH
device.
5
Select "GTK-XB5" on the
display of the BLUETOOTH
device.
Note
If passkey is required on the BLUETOOTH
device, enter "0000." "Passkey" may
be called "Passcode," "PIN code," "PIN
number," or "Password."