Additional Safety Rules; Functional Description - Milwaukee 2771-20 Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

• When servicing a pump, use only identical
replacement parts. Follow instructions in the
Maintenance section of this manual. Use of
unauthorized parts or failure to follow maintenance
instructions may create a risk of electrical shock or
injury and may void the warranty.
• Do not modify or attempt to repair the pump
or the battery pack except as indicated in the
instructions for use and care.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.

ADDITIONAL SAFETY RULES

• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
Some dust created by power sanding,
WARNING
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.
SPECIFICATIONS
Cat. No. ..................................................... 2771-20
Volts.............................................................. 18 DC
Battery Type .................................................M18™
Charger Type................................................M18™
Max Flow Rate............................................. 8 GPM
Fittings .................1/2" NPT male to 3/4" GHT male
Max Lift ...............................................................18'
Max Head Height ................................................75'
Application
Max Water Temperature ................. 140°F (60°C)
Max Air Temperature ...................... 104°F (40°C)
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
GPM
Gallons per Minute
UL Listing for Canada and U.S.
C
US

FUNCTIONAL DESCRIPTION

1. Outlet
2. Direction of flow indicator
3. Handle
4. Battery compartment button
2
1
5. Battery compartment
6. On/Off button
7. Inlet
ASSEMBLY
Recharge only with the charger
WARNING
specified for the battery. For spe-
cific charging instructions, read the operator's
manual supplied with your charger and battery.
Removing/Inserting the Battery
To remove the battery:
1. Press battery compart-
ment button and open the
battery compartment.
2. Push in the release but-
tons and pull the battery
pack out of the tool.
3. Close the battery compart-
ment securely.
Always re-
WARNING
m o v e b a t -
tery before attempting to
install, service, or maintain
the pump. Never handle a
pump with wet hands or
when standing on wet or
damp surface or in water.
To insert the battery:
1. Press the battery compart-
ment button and open the
battery compartment.
2. Slide the pack into the tool.
Make sure it latches securely into place.
3. Close the battery compartment securely.
3
5
4
3
7
6

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

M18M18 2771-20

Tabla de contenido