Panacom PA-7550 Manual Del Usuario página 5

hook state, you dial out the phone number the system will auto add 0
aheaded with phone number and dial out. or dial back call aheaded
with "0" the stored IP code will dialed first and ahead with --- display
and flash. For example : store IP NO. 17909. if you have stored the
IP No. 17909 according above proceeding
Tone/ Pulse Dialing mode
In on hook state, press SET key and then press UP key for four
times, LCD will display SET 5 P-T, then press SET to confirm. LCD
display "TONE", press UP or DOWN to choose PULSE or TONE, af-
ter finished, Pulse or Tone dialing way set and confirmed, press SET
key to confirm and exit.
Alarm Clock Setting
In on hook state, press SET key and press DOWN key, LCD will dis-
play SET 7 RLERL, This function is not available.
Incoming call receiving
When receiving a phone call, the telephone will detect the FSK or
DTMF format and display the calling number. if this is a FSK format
caller ID signal, the current date and time display will also be up-
dated. If this is a DTMD format caller ID signal, the current date and
time will not be changed. if this is a newly coming call, the "NEW"
icon will be displayed. if the incoming call is a repeat number, the
"REP" icon will be displayed. if the incoming call is a private call, the
icon "----P---" will be displayed. if the incoming call is out of area,
the icon "----0----" will be displayed. if a wrong number comes in,
the Error will be displayed '----E----'.
Check incoming calls
You can pick up the handset then use UP or DOWN key to check the
incoming call information including phone number, date and time,
press UP or DOWN key for more than 3 second to quickly check
incoming calls.
Dial back the incoming calls
If you can back a local call, you can direct dial back with REDIAL key.
If you want to dial back a long distance call, you can press REDIAL key
twice, the phone system will automatically add 0 ahead of the phone
Pg. 5