Eshift With Shimano Di2 Derailleur Gears - Bosch PowerPack 300 BBS240 A Manual Del Operador

Tabla de contenido

Publicidad

EN-52
eShift with Shimano Di2 derailleur
gears
eShift with the Intuvia on-board computer
The engaged gear will be shown briefly on the display
whenever the gear is shifted.
The drive unit detects the gear shift and briefly reduces the
motor assistance level as a result, which means the gear can
also be shifted at any time under load or on a hill.
Intuvia eShift basic settings menu
You can choose from the following additional basic settings:
...
<Gear adjustment>: This menu item can be used to per-
form fine adjustment of the Shimano Di2. The pre-defined
setting range can be found in the operating instructions
provided by the gearing manufacturer. Perform fine adjust-
ment as soon as you hear the gearing make unusual noises.
This menu item is displayed only when the on-board com-
puter is in the holder.
<Gear recovery →>: You can use this menu item to reset the
gearing if it has been moved out of position, e.g. due to an
eShift with the Nyon on-board computer
The gear is always displayed in the eShift field. The gear is
displayed briefly during a gear shift only when the eShift
field is not visible (e.g. in settings).
The drive unit detects the gear shift and briefly reduces the
motor assistance level as a result, which means the gear can
also be shifted at any time under load or on a hill.
You can carry out fine adjustment of the Shimano Di2 under
<Gear adjustment>. The pre-defined setting range can be
eShift with the Kiox on-board computer
The gear and switching mode (manual M/automatic A) are
always displayed on the start page. If you are on another
screen, the gear will be briefly shown on the display each
time it is changed.
The drive unit detects the gear shift and briefly reduces the
motor assistance level as a result, which means the gear can
also be shifted at any time under load or on a hill.
You can carry out fine adjustment of the Shimano Di2 under
<Adjust gear>. The pre-defined setting range can be found
in the operating instructions provided by the gearing manu-
Bosch eBike Systems
Always use the Shimano gearstick to shift gears for Shimano
Di2 derailleur gears.
impact on the gearing or a fall. The procedure for resetting
the gearing is described in the operating instructions from
the gearing manufacturer. This menu item is displayed only
when the on-board computer is in the holder.
...
<Gear vx.x.x.x>: Variable speed transmission software ver-
sion. This menu item is displayed only when the on-board
computer is in the holder. This menu item only appears in
conjunction with an electronic variable speed transmission.
...
Intuvia eShift function displays
You can choose from the following additional functions in
the function display (combination of text display and value
display):
...
<Gear>: The currently engaged gear is shown on the dis-
play. The newly engaged gear is briefly shown on the display
each time the gear is changed.
...
found in the operating instructions provided by the gearing
manufacturer. Perform fine adjustment as soon as you hear
the gearing make unusual noises.
<Gear recovery>: You can use this menu item to reset the
gearing if it has been moved out of position, e.g. due to an
impact on the gearing or a fall. The procedure for resetting
the gearing is described in the operating instructions from
the gearing manufacturer. This menu item is displayed only
when the on-board computer is in the holder.
facturer. Perform fine adjustment as soon as you hear the
gearing make unusual noises.
Press the select button of the operating unit and then select
the <My eBike> menu item using +/–. Under this item, you
will find the <eShift> menu item with the sub-item <Adjust
gear>.
English – ​ 5
0 275 007 XES | (29.05.2018)

Publicidad

Tabla de contenido
loading

Tabla de contenido