Adjusting Gears With Shimano Hub Gears - Bosch Drive Unit Speed Manual Original

19.2.2 Adjusting gears with Shimano hub
gears
Example shown is a 7/8-speed hub.
› Select shift lever position 4.
› Check whether the yellow marking lines on the
bracket and cassette joint pulley line up.
select position 4
Yellow marking lines appear at two points on the cassette
joint. Use the line which is most clearly visible.
Bike in normal position
line up markings
Bracket
Bike in inverted position
line up markings
Bracket
yellow marking lines
Cassette joint
pulley
CJ-8S20
JAPAN
Cassette joint
pulley
› Turn the cable adjustment bolt on the shift lever to
align the marking lines. Next, set the Revo-shift
lever from position 4 to position 1 then back to
position 4. Check that the yellow marking lines still
line up.
Cable adjustment bolt
I General User Manual 39