Used Symbols; Information On Intellectual Property; Functional Description And Specifications - Dremel 3D45 Manual De Instrucciones

USED SYMBOLS

Symbol Name
Safety alert
symbol
Read manual
symbol
Danger symbol
DANGER
!
WARNING Warning symbol
!
Caution symbol
!
Hot surface
hazard symbol.
UL US symbol
THIS IS A CLASS A PRODUCT. IN
WARNING
!
A DOMESTIC ENVIRONMENT THIS
PRODUCT MAY CAUSE RADIO INTERFERENCE IN
WHICH CASE THE USER MAY BE REQUIRED TO
TAKE ADEQUATE MEASURES.
INFORMATION ON INTELLECTUAL
PROPERTY
The Dremel 3D45 is intended for 3D printing objects
from digital files that you create or own, or have the
right to print using the Dremel 3D45. When making
objects using the Dremel 3D45, it is your responsibility
to ensure that you do not infringe any third party
intellectual property rights or violate any applicable
laws or regulations, such as U.S. or foreign intellectual
property laws. The Dremel 3D45 may not be used to
make objects protected by intellectual property rights
owned by third parties without such third parties'
permission. Using the Dremel 3D45 to do any of the
following may require the permission of third parties:
to make a duplicate or facsimile (in whole or in part) of
any object not created by you, to make an object from
a digital file you do not own, or to make an object from
a scan of a physical object that you did not create. It is
your responsibility to obtain such permission. In some
cases, you may not be able to obtain such permission.
Where such permission cannot be obtained, you
should not 3D print such object, or you do so at your
own risk. You may not modify, reverse engineer,
Designation/
decompile, or disassemble the Dremel 3D45 or its
Explanation
software or firmware, except as permitted by applicable
law. If you use the Dremel 3D45 in any way other than
It is used to alert you
as recommended and described in these Operating/
to potential personal
Safety Instructions, you do so at your own risk. Using
injury hazards. Obey
the Dremel 3D45 to make objects that infringe any
all safety messages
intellectual property rights owned by third parties could
that follow this symbol
result in civil or criminal prosecution and penalties,
to avoid possible
and you could be liable for money damages, fines, or
injury or death.
imprisonment.
Alerts user to read
manual
indicates a hazardous
situation which, if not
avoided, will result in
death or serious injury
indicates a hazardous
Extruder: Single extrusion
situation which, if not
Extruder temperature: Up to 280°C (536°F)
avoided, could result
Build Platform Temperature: Up to 100°C (212°F)
in death or serious
Operating Interface: 4.5" full color IPS touch screen
injury.
Maximum Build Volume: 10" x 6" x 6.7" (255mm x
indicates a hazardous
155mm x 170mm)
situation which, if not
Layer Thickness: 100 microns | 0.10 mm
avoided, will result
Filament types and colors: See dremel3d.com
in minor or moderate
Internal Storage: 8GB
injury.
External Storage: USB Flash Drive
Contact may cause
burn. Allow to cool
before servicing.
Weight (without spool): 19.4kg (42.8lbs)
This symbol
Dimensions: 20.25" x 16" x 15.9" (515mm x 406mm x
designates that
394mm)
this tool is listed
by Underwriters
Laboratories, to
United States and
Works with Dremel 1.75mm filament
Canadian Standards.
All polymers degrade with time. Do not unpack until
filament is needed. Filament should be stored at room
temperature: 16-29° C (60-85° F) and in dry conditions.
Dremel 3D45 comes with complimentary file
slicing software for Windows and Mac OSX. This
application converts your 3D digital files into buildable
files.
•
•
•
•
423
FUNCTIONAL DESCRIPTION AND
SPECIFICATIONS
BUILDING
WEIGHT & DIMENSIONS
FILAMENT
FILAMENT STORAGE
SOFTWARE
SUPPORTED OPERATING SYSTEMS
Apple® Mac® OS® X v10.9 or later (Mavericks)
Microsoft® Windows® 7 SP1
Microsoft® Windows® Window 8, 8.1
Microsoft® Windows® Window 10