English; General Safety Instructions; Special Safety Instructions; Overview Of The Components - AEG MRC 4109 Instrucciones De Servicio

English

26

General Safety Instructions

Read the operating instructions carefully before putting
the appliance into operation and keep the instructions in-
cluding the warranty, the receipt and, if possible, the box
with the internal packing. If you give this device to other
people, please also pass on the operating instructions.
• To avoid the risk of fi re or an electric shock, you
should not expose the device to rain or moisture.
Consequently, do not use the device in the immediate
vicinity of water - for example near a bath tub, a
swimming pool or in a damp cellar.
• Use the device only for the intended purpose.
• Only connect the device at a properly installed plug
socket. Pay attention that the specifi ed voltage
corresponds to the voltage of the plug socket.
• When using external mains supply, pay attention to
the correct polarity and voltage. Always place the
batteries in the correct direction.
• Assemble the device in such a way that the available
ventilation openings are not covered.
• Never open the housing of the device. Incorrect repairs
can constitute a considerable risk for the user. Should
the device become damaged, in particular the mains
supply cable, do not operate the device any longer, but
rather have it repaired by an expert. Check the mains
supply cable regularly for damage.
• For safety reasons a broken or damaged mains lead
may only be replaced by an equivalent lead from the
manufacturer, our customer service department or a
similary qualifi ed person.
• If the device is not used for a longer period, remove
the plug connector from the plug socket or take out
the batteries.
These symbols may be found on the machine and are
intended to indicate the following:
The lightning symbol should advise the user of
parts in the inside of the device which carry
dangerously high voltage levels.
The symbol with an exclamation mark should
advise the user of important operation or
maintenance instructions in the accompany-
ing documentation.
Children and Frail Individuals
• In order to ensure your children's safety, please keep
all packaging (plastic bags, boxes, polystyrene etc.)
out of their reach.
WARNING!
Caution! Do not allow small children to play with
the foil as there is a danger of suff ocation!
• In order to protect children or frail individuals from
the hazards of electrical equipment, please ensure
that this device is only used under supervision. This
device is not a toy. Do not allow small children to
play with it.
05-MRC 4109 AEG.indd 26 05-MRC 4109 AEG.indd 26
Symbols in these Instructions for Use
Important information for your safety is specially
marked. It is essential to comply with these instructions
in order to avoid accidents and prevent damage to the
machine:
WARNING:
This warns you of dangers to your health and indicates
possible injury risks.
CAUTION:
This refers to possible hazards to the machine or other
objects.
NOTE: This highlights tips and information.

Special Safety Instructions

• Do not use the device in locations that are extremely
hot, cold, dusty or moist.
• Select a suitable location for the radio recorder, such
as a dry, fl at, non-slip surface on which it is easy to
operate the machine.
• Ensure that the radio recorder is suffi ciently ventila-
ted!
• Do not cover any ventilation slits with objects such as
magazines, tablecloths, curtains etc.
• Never touch the mains plug or lead with wet hands.
• Keep the mains lead away from heaters.
• Never put a heavy object on the electric lead.
• Keep the device away from vases, baths, wash basins
etc. If liquid enters the device this may cause serious
damage.

Overview of the Components

1 Hour function key (HOUR)
2 Set minutes (MIN)
3 Time setting function key (TIME)
4 Alarm function key (ALARM)
5 Function key for delayed switch-off
(SLEEP)
6 FM/AM Band selection switch
7 Function switch (AUTO/OFF/ON)
Putting into function
Insert the plug into a properly installed 230 V, 50 Hz
power socket.
Radio station tuning
1. Turn the band selector switch (6) to the FM or AM
position, depending on which frequency band you
wish to hear.
UKW = FM, Medium Wave = AM.
2. Move the function switch (7) to the ON position.
03.07.2008 8:28:33 Uhr 03.07.2008 8:28:33 Uhr