Setup/Basic Operation; Setup; Power Connection; Using Headphones - Bauhn XR-179ERB-1 Manual Del Usuario

Setup

1. Unpack the device and keep all packaging materials until you have made sure
your new device is undamaged and in good working order.
2. Place the device on a flat and level surface that is free from vibration.
3. Before first use, remove the black plastic tie-wrap that is
holding the tone arm
4. Detach the stylus guard (white plastic cover) by pulling it
straight off the stylus cartridge

Power connection

1. Plug the smaller end of the power adapter
the back of the device.
2. Plug the power adapter into an appropriate power outlet (100–240 V).
3. Press the POWER button

Using headphones

Connect headphones (not provided) to the headphone jack
The stereo speakers
3
WARNING: Do not adjust the headphone volume too high. There is danger of hearing
impairment.

Using external speakers

This feature enables you to play audio on the device through
external speakers. You need an RCA cable (not included) to make
this connection.
Plug one end of the L (white) and R (red) RCA jacks into the RCA
output jacks at the back of the device, and the other end into
24
L (white) and R (red) RCA jacks at the back of the external speakers.

Listening to a vinyl record

1. Lift the turntable cover
support latch stops and fully opens. Push the latch
2
forwards with some pressure if necessary.

Setup/Basic operation

30 .
35 .
10 to power the device on or off.
will not work if you use headphones.
all the way up until the cover
1
Setup/Basic operation
26 into the power input jack
13 for private listening.
25 on
7