Main Function; Function Instruction - Panacom PA-7580 Manual Del Usuario

PA-7580 Caller ID Telephone
User's Guide
Thank you for purchasing Panacom's telephone PA-7580.
Please read the manual carefully before operating.

1. Main Function:

* DTMF/FSK two mode incoming mode display
* 50 groups incoming numbers and time memory
* 15 outgoing numbers and talk time memory
* Real time date and weekday display, LCD 5 grades selectable.
* Local area code 8 digits setting, Auto filtrate the local area code
in incoming calls
2. Special Key arrangeMent:
Set key:
At on hook state, press the key enter setting function; At off hook
state, press the key does flash function;
Del key:
At pre-dial state, incoming or outgoing check state and calculate state, it
does the del function; At incoming or outgoing check state press the key
for 2 seconds will delete all the stored numbers. At off hook before pre-
dial, it doesn't add Ex-code and do the auto IP function.
*0# Special application:
At setting state and function option state, press * key is same to the
down key and the # key is same to the up key; At on hook state,
press * key for 3 seconds enter to outgoing check state; press # key
for 3 seconds enter to incoming call check state; At check state,
press 0 to change the check mode; At off hook state, it does the digit
function (At pulse dial mode, the first time to press * is to change to
tone dial mode).

3. Function inStruction

3.1 Menu function setting
At off hook state, press SET key to enter the setting state, LCD dis-
plays SET 12345678, press the digit key or IN/UP key (or * / # key,
The same below) to choose the setting function, and LCD displays
the corresponding setting option, after finish setting,press DEL key
to the upper menu and digit or IN/UP key(or * / # key, The same
below) to choose the next setting option.(If use the * / # key to the
Pg. 3