Block Diagram - Fender Rumble 800 Manual De Instrucciones

TYPE
PR 5141
POWER REQUIREMENTS 1,500 watts (max)
POWER AMP OUTPUT 400W into 8Ω
INPUT IMPEDANCES 1MΩ (input)
INPUT SENSITIVITY 25mVrms (input)
TONE CONTROLS
Bass: ±15dB @ 80Hz
SHAPE FILTER Bright: +13dB @ 10kHz
EFFECTS LOOP
Nominal level: -10dB
LINE OUT Max level: +7dBU
HEADPHONE OUTPUT 140mW into 16Ω/channel
FOOTSWITCHES Economy footswitch (included, PN 0994049000)
DIMENSIONS AND WEIGHT Width: 13.6" (34.5 cm)
4

BLOCK DIAGRAM

For questions and troubleshooting,
contact a Fender specialist at:
1-800-856-9801 (U.S. toll free)
1-480-596-7195 (International)
SPECIFICATIONS
380 watts (typical)
800W into 4Ω/2Ω
10kΩ (aux In)
600mVrms (aux In, both channels driven) (for full power at 100Hz, with Gain/Master at "10" and EQ controls at "0")
Low-mid: ±12dB @ 280Hz High-mid: ±12dB @ 1.2kHz
Contour: +1dB @ 80Hz, -13dB @ 670Hz, +2dB @ 8kHz
Send: 1kΩ (balanced) Return: 22kΩ (balanced)
Impedance: 600Ω (balanced)
Vintage footswitch (optional, PN 0994054000)
Height: 3" (7.6 cm) Depth: 7" (17.8 cm)
Product specifications subject to change without notice.
Treble: ±15dB @ 10kHz ("shelving" type)
Vintage: Dynamic compression (-9dB max) with low pass (-6dB/oct) @ 400Hz
LED footswitch (optional, PN 0994052000)
Weight: 6 lbs. (2.72 kg)