Updating The Firmware - dBTechnologies ES 1203 Manual Del Usuario

English

8. UPDATING THE FIRMWARE

It is very important to keep the product firmware updated to ensure full functionality. Periodically check the
"DOWNLOADS" section of the http://www.dbtechnologies.com website.
1. Download and install the USB BURNER MANAGER onto your computer from the
section.
2. Download the .zip file for your product from the "DOWNLOADS" section.
3. Connect the product to the PC using a USB cable (not supplied) with the correct connector type (see this detail
in the AMPLIFIER AND CONTROL SECTION FEATURES chapter).
4. Select "Open File" at the top right of the USB BURNER MANAGER screen.
5. Select the previously downloaded firmware file.
6. Follow the instructions shown on the screen.
7. Click "UPDATE".
ES-1203
"SOFTWARE & CONTROLLER"
Cod. 420120253 REV. 1.0
57