Audio Playback; Hands-Free Function; Disconnecting The Headset; Care And Maintenance - Hama Calypso Instrucciones De Uso

5.4. Audio playback

Note
• Note that the functions described under 5.4. and 5.5. are
only possible with an active Bluetooth
• Your terminal device must also support the individual
functions.
• For more information, please refer to the operating
instructions of your terminal device.
• Functions can still be controlled directly via the terminal device.
• Set the volume on your terminal device to a low level.
• Switch the headset on using the MFB button (4). Upon
successful connection, a voice says, „Your device is
connected".
• Start audio playback on the connected terminal device.
• Press Volume + (1) to increase the volume. A voice says
'Volume maximum' when the maximum volume is reached.
• Press Volume - (2) to reduce the volume.
• Press the MFB button (4) to start or pause audio playback.
• Press and hold Volume + (1) to skip to the next title.
• Press and hold Volume - (2) to skip to the previous title.
5.5. Extra bass function
This headset is equipped with an extra bass function to reinforce
the bass effect. Press the Extra bass button (3) to switch on this
function while music is playing. To switch this function off again,
press the Extra bass button (3) once more.

5.6. Hands-free function

• Press the MFB button (4) once to answer an incoming call.
• Press and hold the MFB button (4) for 2 seconds or use your
telephone to reject an incoming call.
• During a call, press the MFB button (4) once to end the call.
• Press the MFB button (4) twice to call the number of the last call.
Note
The 'Call number of last call' function is available only for the
device that was connected first in multi-pairing.
Note – Call quality
To increase the call quality, make sure that you are near the
headset with your mobile phone during the call.
4
connection.
®
5.7. Audio input socket
In addition to connecting this headset via Bluetooth
connect it using the included AUX cable.
To do so, insert one end of the cable into the terminal device and
the other end into the Audio input socket (6) on the left side of
your headset. The Bluetooth
when you plug in the audio cable. The headset now functions as
a wired headset.

5.8. Disconnecting the headset

• Switch the headset off.
• Disconnect the headset via the Bluetooth
terminal device.

6. Care and Maintenance

Only clean this product with a slightly damp, lint-free cloth and do
not use aggressive cleaning agents. Make sure that water does not
get into the product.

7. Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no
warranty for damage resulting from improper installation/mounting,
improper use of the product or from failure to observe the operating
instructions and/or safety notes.
8. Service and Support
Please contact Hama Product Consulting if you have any questions
about this product.
Hotline: +49 9091 502-0 (German/English)
Further support information can be found here:
www.hama.com
, you can
®
connection is automatically ended
®
settings on your
®