Cherubini TDS GOLD Serie Manual De Instrucciones página 27

To delete the WINDTEC sensor from the control unit, an already programmed remote
control must be used. The deleting sequence is the following:
A
+ B
To enable (automatically) or disable (manually) the sun sensor, a remote control with Sun/
Wind function must be used. Briefly press the SEL button: the remote control shows the
existing status (see symbols). To change the setting press again the button SEL for about
2 seconds until the motor performs a rotation sequence.
SEL
DELETING THE WIND- & SUN SENSOR
ENABLE / DISABLE THE SUN SENSOR
(WINDTEC LUX)
SEL
2 sec
display
A
Wind and sun sensor activated
Only wind sensor activated
Skipper
Skipper
27
set
2 sec
SEL
GB