Troubleshooting Guide - Audio-Technica QuietPoint ATH-ANC9 Manual De Instrucciones

After using
• After you have finished using your headphones, be certain to move the Power Switch to the
OFF position.
• Remove battery when you will not be using the headphones for an extended period.
• Store the headphones in included protective carrying case; store accessories in attached pouch.
• To clean the headphones, wipe with a clean, soft cloth. Do not use solvents such as benzene or
paint thinner on the headphones.
• Earpads will wear over time. Replacement pads are available from Audio-Technica dealers.

Troubleshooting guide

Problem
Ambient noise is not reduced
Headphones produce rumbling noise
Sound has become distorted
No power
Solution
Adjust headphones' position.
(Headphones may be incorrectly positioned on ears.)
Turn power switch off, and on again.
(Ambient noise may be out of synchronization with
noise-cancelling frequency.)
Adjust headphones' position.
(Headphones may be incorrectly positioned on ears.)
Turn down volume of audio/video equipment.
(Volume may be too loud.)
Change battery in headphones.
(Battery may be drained.)
Check to make sure the battery compartment is
properly inserted.
(Battery compartment may not be fully engaged.)
Change battery in headphones.
(Battery may be drained.)
Make sure power switch is on.
(Power may not be turned on.)
Using your headphones
English
7