Product Specifications; Auxiliary Handle; Features; Mode Selector - Ryobi P221 Manual Del Operador

PRODUCT SPECIFICATIONS

Chuck ...................................................................SDS Plus
Motor ..................................................................18 Volt DC
Switch ......................................Variable Speed / Reversible
KNOW YOUR HAMMER DRILL
See Figure 1, page 12.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.

AUXILIARY HANDLE

Your drill is equipped with an auxiliary handle for ease of
operation and to help prevent loss of control.
DEPTH STOP ROD
A depth stop rod has been supplied with this product to
assist in controlling the depth of drilled holes.

FEATURES

No Load Speed ................................. 0-1,250 r/min. (RPM)
Hammer Speed .............................................0-5,000 BPM*
*Blows Per Minute
Torque ................................................................... 168 in.lb.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/CENTER LOCK)
Your drill has a direction of rotation (forward/reverse
lock) selector located above the switch trigger for changing
the direction of bit rotation. Setting the direction of rotation
selector in the OFF (center lock) position helps reduce the
possibility of accidental starting when not in use.
SDS PLUS CHUCK
The SDS Plus allows quick insertion and release of SDS and
SDS Plus bits.

MODE SELECTOR

The mode selector allows you to quickly switch from rotary
mode to hammer mode.
VARIABLE SPEED SWITCH TRIGGER
The switch trigger delivers higher speed with increased
trigger pressure and lower speed with decreased trigger
pressure.
6 — English
/
center