TRAPP TRF 600 Manual De Instrucciones página 51

www.trapp.com.br
Correct Positioning of Strainers
To avoid accidents with the shredder and to keep
it in optimum operation conditions, it is imperative
that strainers are positioned correctly. They shall
be placed behind the guide pins, as in figure 1.
To correctly place the strainer, start by the curved
side, as in figure 2 and finish as in figures 3 and 4.
In case the strainers are not properly placed, they
may be touched by the cutting blades and cause
serious damages to the shredder.
Fig. 1
Straight
Fig. 2
Fig. 3
Curved
Fig. 4
A
51