Audio-Technica AT-LP7 Manual De Usuario página 5

Part names and functions
Tonearm
Counterweight
1
Balances the tonearm and adjusts to provide the proper tracking
force.
Tracking force gauge ring
2
Use to adjust the tracking force.
3 Tonearm lift
Moves the tonearm vertically to and from the face of the record.
Tonearm rest with clamp
4
Use the clamp to secure the tonearm so that it does not move.
5 Tonearm height setting lever
6 Anti-skate control dial
While the record is playing, a force acts on the stylus tip to pull it
inward. This force can be counteracted by setting the same values
for anti-skate and the tracking force.
Tonearm height adjustment dial
7
Use the adjustment dial to adjust the height of the tonearm.
Tonearm lift control lever
8
Operates the tonearm lift.
Tonearm
9
Locking ring
10
Rotate the ring to the left (counterclockwise) to secure the
headshell. To remove the headshell, rotate the ring to the right.
Headshell and cartridge
11
The cartridge (VM520EB) is attached to the headshell (AT-HS10).
1
2
3
4
5
E
N
6
7
8
9
10
11
4