Audio-Technica AT-LP1240-USBXP Manual De Usuario página 6

Part names and functions
Tonearm
Counterweight
21
Balances the tonearm and provides adjustment for proper
downward tracking force on the stylus.
Tracking force gauge ring
22
Use to adjust the tracking force.
Tonearm height lock
23
Locks the tonearm height setting.
• Always fully unlock before attempting to make a height adjustment.
Anti-skate control dial
24
While the record is playing, a force acts on the stylus tip to pull it
inward. This force can be counteracted by setting the same values
for anti-skate and the tracking force.
Tonearm lift control lever
25
Controls action of tonearm lift.
• Lift mechanism is hydraulically damped to slow tonearm descent.
Tonearm rest with clamp
26
Use the clamp to secure the tonearm so that it does not move.
Tonearm lift
27
Moves the tonearm vertically to and from the face of the record.
Tonearm height adjustment dial
28
Raises and lowers the tonearm to allow it to remain parallel to the
record surface.
Locking ring
29
Rotate the ring to the left (counterclockwise) to secure the
headshell. To remove the headshell, rotate the ring to the right.
Headshell
30
The cartridge (AT-XP5) is attached to the headshell (AT-HS1).
5
21
22
23
24
25
26
27
28
29
30