Preparation For Use - Audio-Technica AT-LP1240-USBXP Manual De Usuario

Tocadiscos profesional con accionamiento directo
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Preparation for use

Placing the platter
This product requires some assembly before using it for the first time.
Do not connect the power cable until assembly is complete.
1. Set the platter on the spindle.
• To avoid damaging the spindle when seating the platter, align the positions
of the spindle and the platter's hole, and then slowly seat the platter.
• Make certain that the platter is fully seated on the spindle.
2. Place the slip mat on top of the platter.
Slip mat
Platter
Spindle
Setting up the turntable
• Position the product on a level surface.
• To avoid the effects of vibrations and acoustic pressure, do not
mount the product next to such items as speakers.
• The product may pick up radio static if placed next to a radio.
Therefore, try to keep the product away from radios.
• If the product is near equipment (cell phone, etc.) that emits strong
radio waves, noise may occur.
Leveling the turntable
After positioning the product where you want to use it, adjust the feet
so that the product is level.
• Use a level (sold separately) as needed to ensure that the product is
level.
Assembling the tonearm
1. Remove the cable tie used to secure the tonearm at the time of
delivery.
• Use the clamp to temporarily secure the tonearm to the tonearm rest.
2. Insert the headshell into the tonearm.
• Hold the right and left edges of the headshell so that you do not damage
the stylus or cut the cartridge's wires.
3. With the headshell inserted, turn the locking ring
counterclockwise (to the left).
4. With the tracking force gauge ring facing forward, attach the
counterweight to the back of the tonearm, and slowly turn it
counterclockwise (to the left).
Tracking force gauge ring
Tonearm balance and tracking force
In order for the cartridge to pick up sound correctly from the record's
grooves, the tonearm's balance and tracking force must be adjusted
to fit the specifications of the cartridge. If the tonearm's balance and
tracking force are not properly adjusted, the record or the cartridge's
stylus may become damaged.
• Do not drag the cartridge's stylus across the record or platter when
adjusting the tonearm's balance or tracking force. Doing so may
damage the stylus.
Locking ring
E
N
6

Publicidad

Tabla de contenido
loading

Tabla de contenido