Part Names; Initial Setup - Pioneer XDP-30R Manual De Instrucciones

> Before Start > Part Names

Part Names

Part Names












4
> Initial Setup > Playback

Library Online
Line
Balanced
Out
Best Mix_01
   





 
Advanced Setup | Supplementary Information | Others
1. Status bar
2. Library: Tap to display the tracks copied from your
computer (P12).
3. Tap when using balanced headphones and switch
between the "Balanced" and "ACG" modes.
Balanced: Compared to the normal single-ended
operation, this mode enables you to get a larger output
and as the high voltage is not grounded together with the
small signal, you can anticipate superior music quality.
Because you get a larger output, you can drive
headphones with a higher impedance.
ACG: The basic operating method is the same as
Balanced (mode), but uses technology to even more
forcefully fix grounding standards, so you can enjoy a
sound quality with improved clarity and stability than
Balanced (mode). Output volume is the same as the
regular single-ended operation, however.
4. Line Out: You can switch the headphone output to the
line output mode to connect external equipment. "Line
Out" is displayed on the status bar when this is on.
5. Turn on or off the Wi-Fi feature. " " is displayed on the
status bar when this is on. Connection settings are
necessary to use Wi-Fi features. Refer to "2. Wi-Fi" (P7)
for connection settings.
6. Turn on or off the BLUETOOTH feature. "
displayed on the status bar when this is on. Pairing is
necessary to connect BLUETOOTH wireless technology
enabled devices. Refer to "Connecting BLUETOOTH
(P16) for connection settings.
7. Shows the name of the track being played. Tap to display
the play screen.
8. Volume dial: Turn the dial to adjust the volume.
9. Online: Tap to switch to a screen showing a list of
network services, such as TuneIn Radio, etc. (P15).
10.You can set to your preferred sound quality (P21).
11. You can make various settings for the unit, such as Wi-Fi
and BLUETOOTH settings (P18).
12.Artwork: Displays the album art of the track being played.
Tap to display the play screen.
13.Skip ( ) button: Skip to the next track.
" is
®
"