Adding / Removing Clothes During A Cycle - Avanti CTW10V0W Manual De Instrucciones

Note:
·
Clothes easily discolored should be washed separately so as to prevent inter-dyeing.
·
If you want to change a selected program, press the POWER button first to turn the unit off, then
press the POWER button again to turn the unit back on, then press the Program button to select
the new cycle before pushing START/PAUSE button.
·
When the Rinse and Spin functions are ON, do not use detergent.
·
If you want to drain the water during washing, press the POWER button first to turn the unit off,
then press the POWER button again to turn the unit back on, then select the SPIN function. Press
START/PAUSE button again to restart.
ADDING / REMOVING CLOTHING AFTER THE CYCLE HAS STARTED
Your washing machine is equipped with a safety system that will stop the machine when the
lid is opened during a wash cycle.
To add or remove clothing to/from a wash cycle follow the steps below:
·
Open the lid, the machine will stop (all indicators on the control panel will turn off).
·
Add or remove the clothing as needed.
·
Close the lid.
·
Press the Start / Pause button to continue the previous wash cycle.
16