Tabla De Contenido; Introduction; Product Overview - Husqvarna 120 Mark II Manual De Usuario

Introduction..................................................................... 7
Safety..............................................................................8
Assembly...................................................................... 13
Operation...................................................................... 14
Maintenance................................................................. 17
Operator's manual
The initial language of this operator's manual
is English. Operator's manuals in other
languages are translations from English.

Product overview

(Fig. 1)
1. Product and serial number plate
2. Trigger lockout
3. Front handle
4. Cylinder cover
5. Chain brake and front hand guard
6. Muffler
7. Bar nose sprocket
8. Right hand guard
9. Trigger
10.Sprocket cover
11.Chain catcher
12.Guide bar
13.Saw chain
14.Starter handle
15.Chain oil tank
16.Starter
17.Fuel tank
18.Choke control
19.Rear handle
20.Stop switch
21.Idle adjustment screw
22.Primer bulb
23.Information and warning decal
24.Chain tensioning screw
25.Guide-bar cover
26.Combination tool
27.Operator's manual
658 - 008 - 10.02.2020
Contents
Transportation...............................................................20
Storage......................................................................... 20
Technical data.............................................................. 21
Accessories.................................................................. 22
Contents of the EC Declaration of Conformity..............23

Introduction

Symbols on the product
(Fig. 2)
(Fig. 3)
(Fig. 4)
(Fig. 5)
(Fig. 6)
(Fig. 7)
(Fig. 8)
(Fig. 9)
(Fig. 10)
(Fig. 11)
(Fig. 12)
(Fig. 13)
Warning
Read this manual
Use approved head protection,
hearing protection and eye
protection
Use approved protective gloves
The product agrees with the
applicable EC Directives
Sound power level
Chain brake, not engaged (left).
Chain brake, engaged (right)
Choke control
Primer bulb
Refueling
Chain oil fill
This product agrees with the
applicable EAC directives
7