Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
• Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or
risk of injury.
• Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or temperature
above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging im-
properly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.
SERVICE
• Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
INFLATOR
• Do not use this tool for purposes other than inflating
items such as car tires, bike tires, lawn equipment
tires, sports equipment, air mattresses, beach toys
and other inflatables. Use of the tool for operations
different from those intended could result in a hazard-
ous situation. Do NOT use this tool to fill air tanks or
shocks. Do NOT use this tool as a breathing device.
Do NOT use this tool to spray chemicals.
• Do not leave the tool unattended during operation.
•Risk of Bursting. Do not overinflate. Follow all
manufacturer's instructions for the item. Do not
set the tool to an output pressure greater than marked
maximum pressure of item to be inflated.
• Use only recommended MILWAUKEE inflator ac-
cessories. Others may be hazardous.
• Never block or plug the air outlet during operation.
• Never carry tool by the air hose. Damage may occur.
•Check air hose for wear or damage before each
use. Check all accessory connections are secure.
Repair all damaged parts before use. Contact a
MILWAUKEE service facility for ALL repairs.
•
Allow tool to cool for 10 minutes after
CAUTION
each 10 minutes of continuous use.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
•
Some dust created by power sanding,
WARNING
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
Read Operator's Manual
Wear Eye Protection
UL Listing for Canada and U.S.
US
C
SPECIFICATIONS
Cat. No. .....................................................2475-20
Volts..............................................................12 DC
Battery Type ................................................ M12™
Charger Type............................................... M12™
Maximum Pressure....120 PSI, 8.27 BAR, 827 kPa
Output .......................................0.88 CFM @ 0 PSI
Recommended Ambient
Operating Temperature ..................... 0°F to 125°F
FUNCTIONAL DESCRIPTION
13
12
11
10
2
1. Inflation button
2. - / + buttons
3. Power button
4. Digital pressure
gauge
5. Handle
6. Sports needle
7. Hose
9
8
3
0.63 CFM @ 35 PSI
14 15
4
3
1
6
8. Raft nozzle
7
9. Presta valve
10. Actual value
11. Overload
indicator
12. Temperature
protection
indicator
13. Battery
indicator
14. Target input
value
15. Units
5
Publicidad
Tabla de contenido
