Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
FUNCTIONAL DESCRIPTION
1
2
3
6
7
8
16
17
18
19
1. Beacon Light
2. Mode Lights
3. Auto-Dump Mode Button
4. Hold Pressure Mode Button
5. Wireless Mode Button
6. Manual Pressure Release Button
7. Parker 3000 series coupler
8. Coupler Swivel
9. ONE-KEY™ Indicator
10. Bluetooth Light
11. Pressure Indicators
12. Light 1 (Wireless Mode)
13. Advance Button
14. Retract Button
15. Light 2 (Wireless Mode)
16. Wireless Power Switch
17. Remote
5
4
9
10
12
13
14
15
24
22
21
20
18. Oil Reservoir
Sight Line
19. Battery Bay
20. Oil Fill Cap
21. Cord
22. Cord Wrap
23. Vent
24. Carry/Lifting
Handle
Volts
Direct Current
UL Listing for Canada and U.S.
C
US
property damage, work on deenergized
lines when possible. Tool is not
insulated. Should work on energized
lines be required, ensure all proper
precautions, including those contained
in NFPA 70E, have been taken first.
To reduce the risk of injury, wear
safety goggles or glasses with side
shields when operating or servicing
the tool.
11
Read operator's manual.
IP54
Ingress Protection
Auto-Dump mode
Hold Pressure mode
Wireless mode
Wireless Power Switch off
Wireless Power Switch on
Recharge only with the charger
WARNING
specified for the battery. For spe-
23
cific charging instructions, read the operator's
manual supplied with your charger and battery.
Removing/Inserting the Battery
To remove the battery, open the battery door, push
in the release buttons and pull the battery pack away
from the tool. Close battery door.
Always remove battery pack before
WARNING
changing or removing accesso-
ries.
To insert the battery, open the battery door, slide the
pack into the body of the tool. Make sure it latches
securely into place. Close battery door.
NOTE: For optimal functionality, use M18™
REDLITHIUM™ 8.0 Ah battery or higher.
5
SYMBOLOGY
To reduce the risk of arc
WARNING
flash, electric shock and
ASSEMBLY
Publicidad
Tabla de contenido
