Connecting The Projector - Sony VPL-EW5 Manual De Referencia

Projecting

Connecting the Projector

When you connect the projector, make sure to:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs firmly. When pulling out a cable, be sure to pull it out from the
plug, not the cable itself.
• Refer also to the instruction manual of the equipment to be connected.
To connect a computer (Analog)
a Plug the AC power cord into a wall outlet.
b Connect the projector to a computer.
Stereo audio connecting cable
(not supplied)
(Use a no-resistance cable.)
Note
For stereo audio connection, connect the stereo audio connecting cable to following connectors:
VPL-EX5/ES5: INPUT A/VIDEO IN AUDIO connector
VPL-EW5: INPUT A AUDIO connector
VPL-EX50: INPUT A/B AUDIO connector
4
GB
Projecting
1
1
2
2
HD D-sub 15 pin
cable (supplied)
VPL-EX50