Dolmar TM-98.14 H2D Manual De Instrucciones página 133

MAINTENANCE
6.2.2 G
UIDE TO SCHEDULED MAINTENANCE
This table is to help you maintain your machine's safety and performance. It
shows the main maintenance and lubrication work, indicating the frequency with
which it should be carried out. To the right of each item there is a box where you
write the date or after how many hours of operation the work was carried out.
W
ORK
1. MACHINE
1.1 Check of tight fixing and sharpness of blades 25
1.2 Blade replacement
1.3 Transmission belt check
1.4 Transmission belt replacement
1.5 Check the blade drive belt
1.6 Blade drive belt replacement
1.7 Check and adjustment of drive
1.8 Check engagement and brake of blade
1.9 Check all fastenings for tight fitting
1.10 General lubrication3
1)
2. ENGINE
2.1 Engine oil change
2.2 Check and cleaning of air filter
2.3 Air filter replacement
2.4 Check fuel filter
2.5 Fuel filter replacement
2.6 Check and cleaning of spark plug points .....
2.7 Replacement of spark plug
1)
See the engine manual for the full list and frequency.
2)
Replace at the first signs of wear, contacting a Licensed Service Centre.
3)
General lubrication should also be carried out whenever the machine is to be
left unused for a long period.
H
OURS
2)
2)
3)
D
ONE
100
25
–
25
–
10
10
25
25
.....
.....
.....
.....
.....
.....
( °
DATE OR N OF HOURS
EN 35
)