Manual Channel Selection; Call Timer; Auto Standby; Ringer Volume - GE 27957 Manual Del Usuario

Speakerphone
1. Press the SPEAKER/CALL BACK button.
2. Wait for a dial tone, then dial the desired number. Or, dial the number
and then press the SPEAKER/CALL BACK button.
3. When finished, press SPEAKER/CALL BACK to hang up.

Manual Channel Selection

While talking, you might need to manually change the channel in order
to reduce static caused by baby monitors, garage door openers, or other
cordless phones. Press and release the CHAN/delete button on the cordless
handset to advance to the next clear channel while in talk mode.

Call Timer

After you pressTALK/call back on the cordless handset (or lift the corded
handset, or press the SPEAKER/CALL BACK button on the base), the built-in
call timer shows in the display and begins counting the length of time of the
call.

Auto Standby

Placing the cordless handset in the charge cradle while the handset is off
the hook (or during a call) automatically hangs up the handset.
Ringer Volume Control
Handset
Use the two-position switch on the cordless handset to turn the ringer off or
on.
The ringer switch must be in the ON position for the cordless handset to
ring when incoming calls are received.
Base Unit
The base ringer volume is set through the programming menu. Refer to
Telephone Set Up for more information.
18