Handset; Caller Id Solutions; Attery; Battery Solutions - GE 27957 Manual Del Usuario

Memory Dialing doesn't work
• Did you program the memory location keys correctly?
• Did you follow proper dialing sequence?
Unit locks up and no communication between the base and cordless

handset

• Unplug the AC power adaptor from the wall outlet and the back of the
base. Remove the handset battery. Wait for 30 seconds and plug the AC
power adaptor back into the base and wall outlet. Reconnect the battery
and charge for 16 hours.

Caller ID Solutions

No Display
• Is battery fully charged?Try replacing the battery.
• Make sure that the unit is connected to a non-switched electrical outlet.
Disconnect the AC power adaptor from the base and reconnect it.
Caller ID Error Message
• The unit displays this message if it detects anything other than valid
Caller ID information during the silent period after the first ring.This
message indicates the presence of noise on the line.
No Caller ID
• In order to receive Caller ID information, you must subscribe to
the standard name/number Caller ID service from your local
telephone company.

Battery Solutions

If you experience any of the following problems, even after fully recharging
the battery, you may need to replace the battery pack:
• Short talk time
• Poor sound quality
• Limited range
44