Storing A Redial Number - GE 27957 Manual Del Usuario

4. Use the base or cordless handset touch-tone pad to enter a name (up
to 15 characters). More than one letter is stored in each of the number
keys. For example, to enter Bill Smith, press the 2 key twice for the letter
B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the
letter L. Press the 5 key 3 times for the second letter L, and press the 1
key to insert a space between the first and last name. Press the 7 key 4
times for the letter S; press the 6 key once for the letter M; press the 4 key
3 times for the letter I; press the 8 key for the letterT; press the 4 key twice
for the letter H.
5. Press the MEM/CONFERENCE (base) or MEMORY/conference (cordless
handset) button again to save your selection.The display shows ENTER
TEL NUMBR.
NOTE: If you make a mistake, press the DELETE button on the base or CHAN/
delete on the handset to backspace and erase the wrong character(s) or number(s).
6. Use the touch-tone pad to enter the area code followed by the telephone
number (up to 24 digits, including pauses) and press the MEM/
CONFERENCE (base) or MEMORY/conference (cordless handset) button
again to save your selection.The unit beeps to confirm.
7. To enter another name and number in a different memory location, return
to step 1 and repeat the process.

Storing a Redial Number

1. Make sure the phone is OFF (not inTALK mode).
2. Perform steps 1 through 5 from the previous section, Storing A Name
And Number In Memory.
3. Press REDIAL to display the redial number and name.
4. Press the MEM/CONFERENCE (base) or MEMORY/conference (cordless
handset) button again to confirm.
NOTE : If the number you want to redial has more than 24 digits, the
telephone number cannot be stored in memory.
26