Displaying The "Radio Settings" Screen; Tuning Into Strong Frequencies; Setting The Fm Or Am Tuning Step; Setting The Alternative Frequency Search - Pioneer AVH-275BT Manual De Instrucciones

Radio
Displaying the "Radio settings"
screen
1 Press .
2 Touch , and then .
3 Touch [AV Source Settings].
4 Touch [Radio Settings].

Tuning into strong frequencies

p You can use this function when "Radio" is selected as the
source.
Local seek tuning allows you to only tune into those radio sta-
tions with sufficiently strong signals.
1 Display the "Radio Settings" screen.
 Displaying the "Radio settings" screen on page 14
2 Touch [Local].
3 Touch the item you want to set.
●
Off (default):
Turns the seek tuning setting off.
●
Level1 to Level4:
Sets the level of sensitivity for FM to Level1 to Level4 (for
AM Level1 or Level2).
p The FM "Level4" (AM "Level2") setting allows reception of
only stations with the strongest signals.
Setting the FM or AM tuning
step
You can switch the tuning step for FM or AM band.
p For FM band, the seek tuning step is fixed to 50 kHz.
p The tuning step remains at 50 kHz during manual tuning.
1 Turn the source off.
 Selecting a source on page 9
2 Display the "Radio Settings" screen.
 Displaying the "Radio settings" screen on page 14
3 Touch [FM Step] or [AM Step] to switch the
tuning step.
The following items are available for each setting:
FM Step
●
100kHz(default)
●
50kHz
AM Step
14
●
9kHz (default)
●
10kHz
Setting the alternative fre-
quency search
When the tuner cannot get a good reception, tunes to another
broadcast station that supports the same program in the current
network.
1 Display the "Radio Settings" screen.
 Displaying the "Radio settings" screen on page 14
2 Touch [Alternative FREQ] to switch "On" or
"Off" (default).

Setting the Auto PI search

When you switch to the broadcast station containing RDS data,
searches for the same PI (Program Identification) code broad-
cast station from all frequency band automatically.
1 Turn the source off.
 Selecting a source on page 9
2 Display the "Radio Settings" screen.
 Displaying the "Radio settings" screen on page 14
3 Touch [Auto PI] to switch "On" or "Off"
(default).
p Even if you set to "Off", the PI search is automatically per-
formed when the tuner cannot get a good reception.
Limiting stations to regional
programing
You can switch whether the area code is checked during the
auto PI search.
1 Display the "Radio Settings" screen.
 Displaying the "Radio settings" screen on page 14
2 Touch [Regional] to switch "On" (default) or
"Off".
Receiving traffic announce-
ments (TA)
The traffic announcement can be received from the last selected
frequency, interrupting the other sources.
1 Display the "Radio Settings" screen.
 Displaying the "Radio settings" screen on page 14
2 Touch [TA Interrupt] to switch "On" or "Off"
(default).

Receiving news announcements

The news can be received from the last selected frequency, inter-
rupting the other sources.
1 Display the "Radio Settings" screen.
 Displaying the "Radio settings" screen on page 14
2 Touch [News Interrupt] to switch "On" or "Off"
(default).

Receiving alarm broadcasts

The alarm broadcast can be received from the last selected
frequency, interrupting the other sources.
1 Display the "Radio Settings" screen.
 Displaying the "Radio settings" screen on page 14
2 Touch [Alarm Interrupt] to switch "On"
(default) or "Off".