Yamaha TX-492 Manual De Instrucciones página 16

By designating a program type, the unit automatically searches all preset stations for an RDS station which broadcasts a program of
that program type.
* There are 15 program types to classify RDS stations. For details, refer to page 14.
1
Turn the unit into the PTY SEEK mode.
PTY SEEK
MODE START
* The program type of the station now being received or
"NEWS" flashes on the display.
2
Select the desired program type.
16
Calling a program of your desired program type
from among preset RDS stations (PTY SEEK)
NATURAL SOUND AM/FM STEREO TUNER TX–492RDS
POWER
Flashes.
TUNING
DOWN UP
PTY SELECTOR
PRESET STATIONS
1 2 3
5 6 7
RDG MODE/FREQ PTY SEEK EON A/B/C/D/E MEMORY EDIT FM/MW/LW TUNING MODE
MODE START MAN'L/AUTO FM
1 3
3
Begin searching all preset RDS stations.
PS PTY RT CT
* "PTY HOLD" lights up on the display.
•
If a station which broadcasts a program of the program
type is found, the unit stops at the station and displays the
frequency of the station. If the station has PS data, after
that, it turns into the PS mode.
•
If the called station is not the desired one, press the PTY
SEEK START button once more.
The unit begins searching for another station which
broadcasts a program of the same program type.
•
If no station is found, "NOTHING" appears and then
returns to frequency display. If the station has PS data,
after that, it turns into the PS mode.
* If the PTY SEEK START button is pressed once more
during searching, this mode is canceled and turns into
the frequency display. If the station has PS data, after
that, it turns into the PS mode.
To cancel this function
If the PTY SEEK MODE button is pressed once more, the
PTY SEEK mode is canceled and turns into the frequency
display. If the station has PS data, after that, it turns into the
PS mode.
4 TUNING
DOWN UP
8
PTY SELECTOR
AUTO/MAN'MONO
2
PTY SEEK
MODE START
AUTO
PTY HOLD
Flashes.