Display Panel - Yamaha TX-492 Manual De Instrucciones

DISPLAY PANEL

* Parts in shaded area (
TX-492RDS only.
1
Preset station indicator
Display the group (A/B/C/D/E) and the number (1 to 8) of a
preset station.
2
Station frequency display
Displays the band and frequency or information from the
received station.
3
AUTO indicator
Lights up when this unit is in the automatic tuning mode.
4
ST (STEREO) indicator
Lights up when an FM stereo broadcast with sufficient signal
strength is received.
5
Signal-level meter
Indicates the signal level of the received station.
If multipath interference is detected, the indication decreases.
6
MEMO indicator
When the MEMORY button is pressed, this indicator flashes
for about 5 seconds. During this period, the displayed station
can be programmed to the memory by using the A/B/C/D/E
button and one of the PRESET STATIONS buttons.
8
1
MEMO PS PTY RT CT EON NEWS INFO AFFAIRS SPORT PTY HOLD
6 7
) are present on
2
8 9
7
RDS mode indicators
The name(s) of RDS mode(s) employed by the currently
received RDS station light(s) up. Illumination of the indicator on
the head of a name shows that the corresponding RDS mode
is now selected.
8
TX-492RDS only
EON indicator
Lights up when an RDS station that employs the EON-PTY
data service is received.
9
Program type name indicators
The name selected in the EON mode lights up.
0
PTY HOLD indicator
Lights up while the search is performed in the PTY SEEK
mode.
A
EDIT indicator
Flashes by the first press of the EDIT button when you will
exchange preset stations, and lights up for a moment by the
second press of the EDIT button to show that the exchange
has succeeded.
3 4 5
AUTO ST
kHz
MHz
EDIT
0 A
TX-492RDS only
TX-492RDS only
TX-492RDS only