Nozzle - Grohe 39354SH0 Manual Del Usuario

Nozzle

Cleaning the Nozzle with Remote Control
To clean the nozzle while using the toilet (sitting on the seat) using the remote control, follow the procedure
below.
1. Press the (set/next) button repeatedly until the [SETTING1] screen appears.
2. Press the button below [CLEANING NOZZLE].
The nozzle remains retracted inside the body and is cleaned for approximately 15 seconds.
Cleaning the Nozzle Manually
You can clean the nozzles manually (such as by scrubbing those parts using a sponge to clean the stains
etc.). Follow the procedures below to extend the nozzles for cleaning.
1. Set the [AUTO FLUSH] and [AUTO OPEN/CLOSE] to [OFF] to disable these functions.
2. Lift the seat lid and seat.
3. Press the (set/next) button repeatedly until the [SETTING1] screen appears.
4. Press the button below [MOVE OUT NOZZLE].
Each time the button is pressed, the toilet unit operates in the following order. Also, shower will not
operate in this state.
128
Top > Cleaning> Cleaning > Nozzle