Video Setup Menu - Yamaha DVX-1000 Manual De Instrucciones

■ Video setup menu

1 In DVD/CD mode, press SET UP.
2 Press
/ to select [VIDEO SETUP PAGE].
3 Press ENTER to confirm.
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
PICTURE SETTING
ADV PICTURE
PROGRESSIVE
COMPONENT
TV type
This menu contains the options for selecting the color
system that matches the connected TV. For details, see
"Selecting the TV type" on page 21.
Note
When [PROGRESSIVE] is set to [ON] (see page 40),
composite video/S-video output depends on the format of
the disc.
Disc TV
format TYPE Component
video
NTSC PAL 576p
NTSC 480p
MULTI 480p
PAL PAL 576p
NTSC 480p
MULTI 576p
TV display
This menu contains the options for matching the aspect
ratio of the receiver to the connected TV. For details, see
"Setting the TV display" on page 22.
Output format
Composite
video/S-video
480i
480i
480i
575i
575i
575i
Picture settings
Note
This receiver comes with three predefined sets of picture
color settings and one personal setting that you can define
yourself.
1 In [VIDEO SETUP PAGE], press
highlight [PICTURE SETTING], then press
STANDARD
Select this for the standard picture setting.
BRIGHT
Select this to make the TV picture brighter.
SOFT
Select this to make the TV picture softer.
PERSONAL
Select this to personalize your picture color by
adjusting the brightness, sharpness, contrast, tint and
color (saturation).
2 Press
/ to select a setting and press ENTER
to confirm.
3 If you selected [PERSONAL], proceed to step 4.
→
The [PERSONAL PICTURE SETUP] menu
appears.
PERSONAL PICTURE SETUP
BRIGHTNESS
SHARPNESS
CONTRAST
TINT
COLOR
4 Press
/ to highlight one of the following
options.
BRIGHTNESS
Increase the value to brighten the picture or vice versa.
You can adjust the value from -20 to +20. Zero (0) is
the average setting value.
SHARPNESS
Increase the value to sharpen the picture or vice versa.
You can adjust the value from -7 to +7. Zero (0) is the
average setting value.
DVD setup menu options
/ to
.
5
0
0
0
0
0
37
En